840141302 v03.qxd:840141301 Blender 10/8/08 11:29 AM Page 6
BEFORE FIRST USE
After unpacking the blender, follow instructions in “How to Clean.”
CONTROL PANEL
First select and push a
LOW or HIGH power button, then push desired speed button.
The blender will run until
you push the OFF button. The OFF button is also the Ice Breaker™/Pulse Button. When using Pulse or IceBreaker, the blender will only run as long as the button is pushed. As buttons are pushed left to right, the speed at which the blades spin will increase.
HOW TO ASSEMBLE AND USE
IMPORTANT: Your blender jar and cutting blades are sub- ject to wear during normal use. Always inspect jar for nicks, chips, or cracks. Always inspect cutting blades for broken, cracked, or loose blades. If jar or cutting blades are damaged, do not use. Call our
■Make sure blender is unplugged. Place blender base on clean, dry surface to keep foreign particles from being pulled up into motor during operation.
■Place cutting blades in Sure Rest™ jar base. Set jar on top of cutting blades and tighten on jar base.
■Make sure the Sure Rest™ jar base is firmly screwed onto the jar. If not, it may loosen later when motor is turned on.
■Set assembled jar into place on blender base, making sure it is securely seated. If not, gently rock the jar until seated.
■Plug cord into outlet.
6
