Hamilton Beach 2-Way FlexBrew Coffeemaker manual How to Use Single-ServeSide, Brewing K-Cup*Packs

How to Use Single-Serve Side –

Brewing K-Cup®* Packs

wWARNING Burn Hazard.

To avoid contact with hot coffee or water:

•Do not use more than 10 oz. (300 ml) of water for K-Cup®* pack. Adding too much water to the water reservoir will cause an error message to appear in the display, along with a long beep. Place carafe on warming plate. Turn brew selector dial to Carafe ( ) and push BREW NOW button to remove water. Wait for 3 beeps and blue power light to turn off. Restart the Single-Serve process.

•Fill reservoir with cup or travel mug of water into which the coffee will be brewed.

•Fully insert cup or travel mug under brew basket.

•For best results, use K-Cup®* packs sold by Green Mountain Coffee®‡.

NOTES:

•The unit will only brew on one side at a time.

•For Hotter Coffee: Rinse the mug with hot water before brewing.

•The Brew Mode selection will stay in the last mode used, unless unplugged.

•Coffee may continue to drip after brewing is complete (after 3 beeps) when using finely ground coffee.

1

2

3

•Programming mode cannot be used on Single-Serve side.

Plug in coffeemaker. Rotate brew selector dial to the right to select Single-Serve ( ). Press BREW OPTIONS button to select .

Remove brew basket. Place a pack into the K-Cup®* pack holder.

CAUTION! Cut Hazard: K-Cup®* pack holder has a sharp blade. Handle with care.

Press down on edge of the pack until the pack snaps into place and hole is punched in the bottom. Do not remove foil.

‡Green Mountain Coffee is a trademark of Green Mountain Coffee Roasters, Inc. Use of the Green Mountain Coffee trademark

does not imply any affiliation with or endorsement by Green Mountain Coffee Roasters, Inc. 5

840219700 ENv10.indd 5 4/22/13 2:18 PM