Hamilton Beach 2-Way FlexBrew Coffeemaker manual Brewing Coffee Grounds or Soft Pods

How to Use Single-Serve Side –

Brewing Coffee Grounds or Soft Pods

wWARNING Burn Hazard.

To avoid contact with hot coffee or water:

•Do not use more than 14 oz. (410 ml) of water for ground coffee or Melitta®§ Pods. Adding more than 14 oz. of water to the water reservoir will cause an error message to appear in the display, along with a long beep. Place carafe on warming plate. Turn brew selector dial to Carafe

( ) and push BREW NOW button to remove water. Wait for 3 beeps and blue power light to turn off. Restart the Single-Serve process.

•Fill reservoir with cup or travel mug of water into which the coffee will be brewed.

•Fully insert cup or travel mug under brew basket.

•Remove K-Cup®* pack holder before adding coffee grounds to brew basket.

This unit can be used with Melitta®§ soft pods, available in the coffee aisle of your local grocery store.

NOTE: It can take up to 2 minutes before brewed coffee starts dispensing into your cup or travel mug.

1 2

3

Plug in coffeemaker. Rotate brew selector dial to the right to select Single-Serve ( ). Press BREW OPTIONS button to select GROUND mode.

To remove K-Cup®* pack holder, grasp the K-Cup®* pack holder cup; slide towards the back and then lift out.

CAUTION! Cut Hazard: Removable K-Cup®* pack holder has a sharp blade. Handle with care.

Add ground coffee (3 Tablespoons [45 ml] is the MAX amount of ground coffee for brew basket) or soft pod to brew basket.

WARNING! Burn Hazard: To avoid overflow, keep ground coffee below MAX fill line.

§Melitta is a registered trademark of Melitta Haushaltsprodukte GmbH & CoKG. Use of the Melitta trademark
does not imply any affiliation with or endorsement by Melitta Haushaltsprodukte GmbH & CoKG.	7

840219700 ENv10.indd 7 4/22/13 2:18 PM