How to Clean Your Can Opener
Hints for Best Use
• The can opener will easily open all standard size cans. |
• On some models it will be necessary to position can opener |
1.Unplug cord from electrical outlet.
2.To remove the piercing lever, push lever up and to the left. It will pop out of a locked position.
3.Wash the piercing lever in hot, soapy water. Rinse and dry thoroughly. Do not place in dishwasher.
4.Wipe the body of can opener with damp cloth. NEVER im- merse the can opener in water.
5.To assemble, place the knob on the back of piercing lever into large end of keyhole with the lever pointing toward the ceiling. Push the lever to the left until it locks into place.
Remove
Reassemble 
at edge of counter, allowing for clearance to open cans |
taller than the can opener. |
• If there is a bump, dent, or heavy seam in the rim of the |
can, open the other end of the can or start cutter just |
beyond the problem area. |
• The motor of your can opener is permanently lubricated |
and will require no oiling. |
• To use the cord storage on the back of the opener, push in |
or pull out the cord as needed. |
Sharpening Knives
1.Place cutting edge of knife in the knife slot located on the back of the can opener.
2.Draw the knife blade through the
slot several times.
NOTE: Serrated blades should never be inserted into this unit.
6 | 7 |
