Hamilton Beach DE-301/331, DE-302/304/332/334 2a. DIN Rail Mounting Brackets-Inner Placement

DIN Rail

NPort Server Lite can also be mounted on a standard 35-mm DIN Rail. First, use two screws to attach each of the two DIN Rail brackets to the metal attachment plates (Figs. 2-2a, b).

Figure 2-2a. DIN Rail Mounting Brackets—Inner Placement

Figure 2-2b. DIN Rail Mounting Brackets—Outer Placement

Since the screw heads are beveled, and the holes in the plate are countersunk, the tops of the screws will be flush with the metal plates. This allows the metal plates (now with the DIN Rail brackets attached) to be screwed to the bottom of the server. Use three screws to attach the metal plate to the bottom of NPort Server Lite, with the orientation as shown in Fig. 2-3a or Fig. 2-3b.

2-3