Hamilton Electronics PA-85 Specifications Amplifier, Receiver, Transmitter, Important Safeguards

Models: PA-85

1 5
Download 5 pages 21.5 Kb
Page 2
Image 2
SPECIFICATIONS

SPECIFICATIONS

AMPLIFIER

Power supply:

AC120V/60Hz

 

built-in 3x6V 7A rechargeable batteries

Frequency response:

35-20000Hz

SPL:

94dB(1W/M)

T.H.D.:

<1%

Input wired mic:

-58dBV600

Record output:

0dBV 1K

Speaker:

2x 8" full range speaker

Output power:

RMS 85W, PEAK 170W

Input jack:

2x1/4" wired mic jack, 1 RCA audio Line In jack

Output jack:

1 RCA (VIDEO+L/R AUDIO) jack

RECEIVER

Carrier frequency range: UHF690~865 MHz

RF sensitivity:

<-101dB

Image rejection:

> 60dB

S/N ration:

>65dB

Operation range:

150 ft

TRANSMITTER

Carrier frequency range:

UHF 690~865MHz

RF power output:

<10mW

Modulation level:

15K

Operation temperature:

-18 ~ 60

Power supply:

9V

Battery Life:

10 Hours

IMPORTANT SAFEGUARDS

IMPORTANT

To protect rechargeable battery life, this unit is shipped without installing battery fuse. Before using this unit please install fuse (included in accessories pack). Charge the battery fully before first use. Charge battery each month if you are not going to use this unit for a long period of time. Avoid total discharging of the battery.

WARNING:

*To prevent fire or shock hazard, do not expose the unit to rain or moisture.

*To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

PRECAUTIONS:

*Be sure to use the correct power supply.

*Hold the plug of the cable when connecting or disconnecting the cable from wall socket.

*Turn volume control of the amplifier to minimum before power on. Then adjust volume to suitable level as desired to avoid damage to your ear, the amplifier or speaker.

*Please pull out AC plug from the wall socket and turn off the unit if you are not going to use the unit for a long period of time.

*To extend the usage time, keep the interval between turn on and turn off of the unit no less than 10 seconds.

*Do not use the system where it may be subjected to:

---direct sunlight or near the heat radiators or other heat sources

---excessive dust or poor ventilation

---excessive humidity or rain

---mechanical or other vibrations

---8---

---1---

Page 2
Image 2
Hamilton Electronics PA-85 Specifications Amplifier, Receiver, Transmitter, Important Safeguards, Precautions