Remote Control - Your fan is equipped with a remote control to operate the speed and lights of your new ceiling fan. For more information on how to install the remote control, see the re- mote control instruction along with the remote control components.
Speed settings for warm or cool weather depend on factor such as the room size, ceiling height, number of fans and so on.
The fan shipped from the factory with the re- versing switch positioned to circulate air down- ward. If airflow is desired in the opposite direc- tion, turn your fan off and wait for the blades to stop turning, then slide the reversing switch (located at the top of the motor housing, refer to figure 7 on page 5) to opposite position, and turn fan on again. The fan blades will turn in the opposite direction and reverse the airflow.
1.Speed - The remote features Low, Med, Hi and Off buttons to select the desired speed of operation and turn the fan On or Off.
2.Lights - To control the light kit, the remote features a light/Dimmer button.
Warm weather - (Forward) A downward air flow creates a cooling effect as shown in Figure 14. This allows you to set your air conditioner on a higher setting without affecting your comfort.
Cool weather - (Reverse) An upward air flow moves warm air off the ceiling are as shown in Figure 15. This allows you to set your heating unit on a lower setting with- out affecting your comfort.
Figure 14 |
Figure 15 |
