Hand Held Products 4800P 4800p 2D Imager Users Guide 7 - 5

4800p 2D Imager User’s Guide 7 - 5
L, R, T, B, M - Image Cropping: Ships a window of the image by specifying
the left, right, top, and bottom pixel coordinates. Device columns are
numbered 0 through 640, and device rows are numbered 0 through 480.
n L The left edge of the shipped image corresponds to column n of the
image in memory. Range: 000 - 640.
(Default = 0)
n
R The right edge of the shipped image corresponds to column n - 1
of the image in memory. Range: 000 - 640.
(Default = all columns,
or 639 for VGA imager)
n
T The top edge of the shipped image corresponds to row n of the
image in memory. Range: 000 - 480.
(Default = 0)
n
B The bottom edge of the shipped image corresponds to row n - 1 of
the image in memory. Range: 000 - 480.
(Default = all rows, or
479 for VGA imager)
Alternately, specify the number of pixels to cut from the outside margin of the
image; thus only the center pixels are transmitted.
n M Margin: cut n columns from the left, n + 1 columns from the right,
n rows from the top, and n + 1 rows from the bottom of the image.
Ship the remaining center pixels. Range: 1 - 238.
(Default = 0, or full image)
P - Protocol: Used for shipping an image. Protocol covers two features of the
image data being sent to the host. It addresses the protocol used to send the
data (Hmodem, which is an Xmodem 1K variant that has additional header
information), and the format of the image data that is sent.
0P None (raw data)
2P None
(default for USB)
3P Hmodem compressed
4P Hmodem
S - Pixel Ship: Can be used to decimate the image by shipping only certain,
regularly spaced pixels. For example, 4S would transmit every fourth pixel
from every fourth line. The smaller number of pixels shipped, the smaller the
image. However, after a certain point, the image becomes unusable.
1S ship every pixel
(default)
2S ship every 2nd pixel, both horizontally and vertically (default)
3S ship every 3rd pixel, both horizontally and vertically
U - Document Image Filter: Sharpens the edges and smooths the area
between the edges of the transmitted text image. The Document Image Filter
enhances images of documents such as ID cards and prescriptions. This filter
should be used with gamma correction (see page 7-4), with the imager in a
stand, and the image captured using the command:
IMGSNP1P0L168W90%32D