CHAPTER 3 DOLPHIN 7200 RF HANDHELD COMPUTER
52
5252
52
F1 RF Setup
To configure the terminal for use in a local area network, press <F1> and enter the
data for each of the options on the screen shown below.
F1-RF Setup
F1 SET SECURITY ID
Press <F1> to set the Security ID. Enter a value for the Security ID option and press
<ENTER>.
The Security ID is a unique, 20 character alphanumeric string defined and configured
by the user. It must be identically configured in every radio intended to communicate
with others in the same network.
F2 R/W RADIO DOMAIN
Press <F2> to enter the Radio Domain. Once the Radio Domain is written, the
Dolphin 7200 RF terminal must be reset to activate the new Radio Domain.
The Domain is the area within a LAN that defines a region administered by an
access point. It is a software filter that does not affect the actual radio frequency
or the frequency hopping sequence. The Domain is a number between 0 and
15. It is the equivalent of a wireless subnet.
NOTE
Reset the Dolphin
terminal by pressing
and releasing the
<SHIFT>,
<ON/SCAN>
and <BKSP> keys.
All three keys must be
held down and released
at the same time.
NOTE
The Dolphin need
not be reset after
each configuration
change, but can be
done once all
configurations
changes have been
made.