CHAPTER 5 DOLPHIN 7200 WITH IMAGE-CAPTURE
HANDHELD COMPUTER
76
7676
76
Capturing Images
After you have selected the compression and cropping option and opened the
Dolphin Image Capture server program on your PC, follow these screen prompts to
capture an image.
1.
Scan Image Screen
Press the ON/SCAN key, aim and release it to take an image. After you scan the
image, the terminal will beep, the screen will go blank momentarily and the image
taken will appear on the screen. If the image is acceptable, press the ENTER key to
save the image and proceed to the next step. If the image is not satisfactory, press
the ON/SCAN key to take a new image. Repeat as necessary to acquire the desired
image and proceed to the next step.
2. The following screen will appear:
3. Place the terminal in the HomeBase to begin transferring the file to your host
computer. Note: You must put the terminal into the HomeBase within 15
seconds of taking the image. Otherwise, the image will be deleted and you will
have to retake the image.