Page 8 Introduction to Your Visor Handheld
Using the backlight
If you have difficulty seeing the information on your Visor ha ndheld,
you can use the backlight to illuminate your screen.
To activate the backlight :
■Press the power button a nd hold it down for about two seconds.
Release the button when the backlight turns on.
Tip: In addition, you can assign the full-screen pen stroke to
activate the backlight. See “Pen preferences” in Chapter 9 for
more information.
To turn off the backlight:
■Press and hold the power button for about two seconds. The
backlight also turns off automatically ( after a period of ina ctivity)
with the Auto-off feature. See “General preferences” in Chapter 9
for more information .
Protective cover
The cover protects the Visor handheld screen when it is not in use.
To remove the cover:
1. Unclip the top of the cover from your handheld.
2. Lift the cover off your handheld.
To reattach the cover:
1. Insert the pegs on the bottom of the cover into the holes on the
bottom of your handheld.
2. Gently press the top of the cover onto your handheld until it clicks
into place.
Unc
li
p top e
d
ge to
remove cover
Align pegs to
replace cover