Chapter 9 Page 199
Network preferences and TCP/IP software
The Network Preferences settings enable you to use the TCP/IP
software that is included in the handheld operating system. You can
use the TCP/IP software to connect with Internet Service Providers
(ISPs) or dial-in (remote access) servers. Because the TCP/IP software
is a feature of the operating system, you configure all parameters
relating to it from the Preferences application.
To use TCP/IP, you must configure both the Modem Preferences and
the Network Preferences settings.
Note: Modem Preferences settings enable your Visor handheld to
use a modem to communi cate with remote devices. Fo r
example, you can communicate with your ISP server, or with
your computer if you are away on travel. See “Modem
preferences” earlier in this chapter for a complete explanation
on how to configure modem parameters.
After you configure both the Network and Modem Preferences, you
can establish a PPP (Point-to-Point Protocol), SLIP (Serial Line Internet
Protocol), or CSLIP (Compressed Serial Line Internet Protocol)
connection with your ISP or dial-in server. You can do this either by
using menu commands from the Network Preferences screen or by
using a third-party application.
Note: TCP/IP provides the ability to connect to your ISP or dial- in
server with applications that allow you to view the
transmitted data. Visit the web site http://
www.handspring.com for information on third-party
applications that take advantage of TCP/IP.

Selecting a service

Use the Service setting to select the service template for your Internet
Service Provider or a dial-in server. Service templates are a set of ISP
and dial-in server configuration settings that you can create, save, and
reuse.