Quick Start
er 3 Installation
H3C S3100-SI Series Ethernet Switches Chapt
3-4
Figure 3-3 Anchor kit illustration
The wall-mount procedure is as follows (see Figure 3-4):
1) Drill two holes in the wall on the same horizontal line, with a
distance of 169 mm.
2) Insert anchor kits into the holes.
3) Drive the screws into the anchor kits, keeping the screws 1.5
mm out of the wall.
Figure 3-4 Wall-mount illustration
4) Aiming at the two screws, hook the two mounting holes of
the switch on the screws.