Hanns.G HW216 Error Message & Possible Solutions, Recommended and Supported Timing Mode

User’s Manual

ERROR MESSAGE & POSSIBLE SOLUTIONS

CABLE NOT CONNECTED :

1.Check that the signal-cable is properly connected, If the connector is loose, tighten the connector’s screws.

2.Check the signal-cable’s connection pins for damage.

INPUT NOT SUPPORT :

Your computer has been set to unsuitable display mode, set the computer to display mode given in the following table.

RECOMMENDED AND SUPPORTED TIMING MODE:

(Analog / Digital mode)

	MODE	RESOLUTION
	1	640×480 @60Hz
	2	640×480 @75Hz
	3	800×600 @56Hz
	4	800×600 @60Hz
	5	800×600 @72Hz
	6	800×600 @75Hz
	7	1024×768 @60Hz
	8	1024×768 @70Hz
	9	1024×768 @75Hz
	10	1280×1024 @60Hz
	11	1280×1024 @75Hz
	12	1680×1050 @60Hz
(YPbPr mode)
	MODE	RESOLUTION
	1	720x480i @60Hz
	2	720x480p @60Hz
	3	720x576i @50Hz
	4	720x576p @50Hz
	5	1280×720p @50Hz
	6	1280×720p @60Hz
	7	1920×1080i @60Hz
	8	1920×1080p @60Hz
	9	1920×1080i @50Hz
10		1920×1080p @50Hz

*** The picture performance at 480i,576i or 1080i is not guaranteed.

20