HANNspree DT07-10A1 manual Switching Source Signals, Adjusting the Volume

Switching Source Signals

Press the SOURCE button on the remote control or the TV/AV button on the control panel to select the incoming source signal.

The current source setting CH XX appears on the top left corner of

the screen; AV1 or AV2 appears on the bottom right corner of the screen.

TV/AV (Source)

Current source setting

C H 4 0

AV 1

Note:TV/AV

The TV supports S-Video input in addition to normal video and audio signals. The TV detects the signal type automatically and gives priority to S-video when two signals are detected at the same time. This auto detection function is only available for AV2.

Adjusting the Volume
Press the VOL UP button to	Volume up
increase the volume. Press the	Volume down
VOL DOWN button to decrease the
volume. The volume level is dis-
played on the TV.	MUTE

Press the MUTE button on the remote control to turn the sound off. The word “Mute” appears on the top left corner of the screen

and sound is temporarily turned off.

Press the MUTE button on the remote control or press the VOL UP but- ton or VOL DOWN button to restore the original volume.

27