![](/images/new-backgrounds/1201398/201398115x1.webp)
12
Troubleshooting
Situation | Solution | |
|
| |
| • Connect the power cord properly. | |
| • Check if the power LED is on or not. | |
| • Press power on the control panel or remote | |
| control. | |
| • Press source to cycle through connected | |
No picture and sound. | video sources. | |
• Press channel up or channel down to | ||
| ||
| switch to other TV stations. | |
| • Check the TV/CATV OSD settings. See | |
| “TV/CATV” on page 44. | |
| • Make sure all cables are connected | |
| properly. | |
|
| |
| • Check the antenna and cable connections. | |
No picture, or poor picture, sound is OK. | • Adjust the brightness in the OSD menus. | |
| See “Brightness” on page 31. | |
|
| |
| • Adjust the saturation in the OSD menus. | |
Picture is not in color. | See “Saturation” on page 35. | |
• Make sure all cables are connected | ||
| ||
| properly. | |
|
| |
| • Make sure the source device is functioning | |
| properly. | |
| • Make sure the audio cable is connected | |
| securely. | |
Picture is OK, no sound. | • Turn the mute off. | |
| • Press volume up on the control panel or | |
| remote control. | |
| • Make sure the MTS option is set to Stereo, | |
| SAP, or Mono. See “MTS” on page 45. | |
|
| |
| • Adjust the balance in the OSD menus. See | |
One of the speakers has no sound. | “Balance” on page 41. | |
• Make sure the audio cable is connected | ||
| ||
| securely. | |
|
| |
Cannot receive some TV channels using | • Try the Auto Program function in the OSD | |
“TV Setting” menu. See “Auto Program” on | ||
cable TV. | ||
page 46. | ||
| ||
|
| |
Want to reset TV settings. | • Use the Reset function in the OSD menu. | |
See “Reset” on page 55. | ||
|
57