Philips SCD450 user manual Troubleshooting, Connecting / disconnecting the belt clip

EN Features

Connecting / disconnecting the belt clip

(small parent unit)

You can carry the small parent in and around your house, giving you freedom of movement while still monitoring your baby.

Connecting the belt clip

•Insert the little spindle on the rear of the belt clip into the recess on the rear of the parent unit.

Turn the belt clip to the left until it clicks in position.

Disconnecting the belt clip

• Turn the belt clip to the right (TURN 2) and take it off.

Troubleshooting

Problem	Possible cause	Solution
No sound on parent units	Volume off or too low.	Turn VOLUME controls (B-9, C-10)
		on parent units downwards.
	Units out of range.	Move parent units closer to
		baby unit.
No connection	Units are set to different	Set channel selection switches
between units.	channels.	(A-9, B-8, C-8) to the same
		position on all three units.
	Parent units out of range of	Move parent units closer
	tansmitted signal.	to baby unit.
Battery pack of	Battery life at an end.	Replace battery pack (C-14).
small parent unit
does not charge.

14