Philips SCD450 EN Using your baby monitor, Features, Avoiding interference channel selection

EN Using your baby monitor

3Switch on the parent units using the ON/OFF switches (B-9, C-10) and adjust the volume to the level you prefer using the VOLUME controls (B-9, C-10).

> The POWER lights (B-10, C-11) light up green.

>When connection has been established between the units, the LINK lights (B-3, C-9) on the parent units light up green.

4Position the baby unit at least 1 meter / 3 feet away from

your baby.

5Position the parent units at the desired place within the operating range of the baby unit but at least 1 meter / 3 feet away from the baby unit. For more information on the operating range see ‘Technical specifications’.

>When your baby makes sounds, this will be heard on both parent units.

➜Your can now monitor you baby!

Features

Avoiding interference (channel selection)

Always make sure that the CHANNEL selection switches (A-9, B-8, C-8) inside the battery compartments on all units are set to the same position!

With the CHANNEL selection switches (A-9, B-8, C-8) you can select sixteen different channel positions. If you experience interference from other baby monitors, radio devices, etc. select a different channel.

10