Philips SCD450 user manual EN Features, Adjusting microphone sensitivity, Monitoring baby silently

EN Features

Adjusting microphone sensitivity

With the microphone sensitivity switch (A-8) on the baby unit, you can set the sound, coming from the baby unit, to the desired level: low, mid or high.When set to the maximum level, the baby unit monitors all sounds.You can only change the microphone sensitivity if the connection between the baby unit and the parent units is established (when the LINK lights (B-7, C-9) light continuously green).

•Use the microphone sensitivity switch (A-8) to adjust the baby unit microphone sensitivity to the desired level.You can use your own voice as a sound reference.

>The POWER light (A-7) on the baby unit lights up yellow when a sound is picked up.

Monitoring baby silently

•Use the ON/OFF switch / VOLUME controls (B-9, C-10) on the parent units to set the volume to the lowest level.

Do not switch off the parent units completely!

>The sound level lights (B-1, C-1) on the parent units visually alert you to baby’s sounds.The more sounds your baby makes, the more lights you will see.

>When no sound is detected all sound level lights

(B-1, C-1) will be off.

Note:You can also monitor baby silently on only one of the parent units

Switching the night-light on and off

•Press the baby unit night light (A-2) to switch it on and off.

12