Philips SCD450 user manual Welcome EN, Getting your baby monitor ready, Mains operated use

Welcome EN

Philips is dedicated to produce caring, reliable products to give parents the reassurance they need.With this baby monitor you can hear your baby from where ever you are in and around your house.With sixteen different channels options you will experience minimal interference.

Philips Baby Care, taking care together

Safety information

Please read this user manual carefully before using your baby monitor and keep it for future reference.This baby monitor is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such.

•Make sure the baby unit and adapter cable are always out of reach of the baby (at least 1 meter / 3 feet away).

•Never place the baby unit inside the baby’s bed or playpen.

•Never cover the baby monitor (with a towel, blanket, etc.).

•Never use the baby monitor in moist places or close to water.

•Check if the voltage indicated on the type plate of the adapters (A-4, B-4, C-3) correspond to the local power voltage before connecting to the AC power supply.

•Do not expose the baby monitor to extreme cold, heat or light (e.g. direct sunlight).

•To prevent electric shock, do not open the inside of the baby unit and parent units (except for the battery compartment covers)

•The antennas on all three units are fixed; do not try to extend them.

Getting your baby monitor ready

Baby unit

The baby unit can be mains or battery operated.

When batteries are installed, you have an automatic back up in case of mains failure.

Mains operated use

1Connect the power adapter cord to the power supply jack (DC 9V —<+- A-3) of the baby unit.

2Connect the AC power adapter (A-4) to a wall outlet.

➜The baby unit is now ready for mains operated use.

Battery operated use

1Remove the battery compartment cover (A-10) of the baby

unit, using a coin.

7