KitchenAid KGRT507 warranty Troubleshooting, Problem Possible Cause What to do

Troubleshooting

This section is designed to help you save the cost of a service call. It outlines possible prob- lems, their causes, and actions you can take to solve each problem. If you still need assis- tance or service, call our Consumer Assistance Center (in the U.S.A., see page 66; in Canada, see page 67) for help or calling for service. Please provide a detailed description of the problem, your appliance’s complete model and serial numbers, and the purchase or installation date. (See the “A Note to You” section.) This information will help us respond properly to your request.

PROBLEM	POSSIBLE CAUSE	WHAT TO DO
Nothing will	The unit is not plugged in or	Plug unit into a properly grounded
operate	wired into a live circuit with	outlet. Wire the unit into a live circuit
	proper voltage.	with proper voltage. (See Installation
		Instructions.)

A household fuse has blown or a circuit breaker has tripped.

Replace household fuse or reset circuit breaker.

The unit is not properly	Contact a designated servicing
connected to gas supply.	outlet to reconnect range.

The oven will You have not set the

not operate electronic control correctly.

Refer to the section in this manual describing the function you are operating.

	You have programmed a	Wait for the start time to be reached
	delayed start time.	or cancel and reset the controls.
Burner fails to	The unit is not plugged in or	Plug unit into a properly grounded
light	wired into a live circuit or cir-	outlet. Wire the unit into a live circuit
	cuit with proper voltage.	with proper voltage. (See installation
		instructions.)
	A household fuse has blown	Replace household fuse or reset
	or a circuit breaker has	circuit breaker.
	tripped.
	The burner ports are clogged.	Clean with a straight pin. (See
		page 13.)
Burner flames	The burner ports are clogged.	Clean with a straight pin. (See
are uneven		page 13.) If this fails, call for service.
Burner flames	The air/gas mixture is	Follow instructions on page 14
lift off ports, are	incorrect.	“Adjusting the height of top burner
yellow, or are		flame.” If this does not work, call
noisy when		service technician to check mixture.
turned off.
Burner makes	The burner is wet from	Let dry.
popping noises	washing.
when on

62