KitchenAid KGRT507 warranty Using the surface burners, Burner heat settings, Med

Using and Caring for Your Cooktop

Using the surface burners:

	O
	L
REAR	OFF
	ED
	M
	IH

Control knobs

1.Grasp the control knob.

2.Push down and turn to HI. The electric spark ignitor will ignite the gas flowing into the burner. When you hear a clicking sound, you know that the ignitors are working. Gas is flowing as long as knob is not set at OFF.

3.When the burner is lit, turn the control knob to the desired flame setting. (See the guide under “Burner heat settings” later in this section.) You can turn the knobs to any of the marked settings. The ignitor will turn off and the clicking will stop when the burner ignites.

NOTES:

•The ignitors may click a number of times before burner lights. This is normal.

•All four burner ignitors will spark regardless of which burner you are using.

•Visually check that the burner has lit. If the burner does not ignite, listen for the clicking sound. If you do not hear the ignitor click, TURN THE BURNER OFF. Check that the service cord is placed firmly in the wall receptacle. Check for a tripped circuit breaker or blown fuse.

Check that the control knob is pressed completely down on valve shaft. If the spark ignitor still fails to operate, call your nearest designated service outlet.

Proper grounding and polarity are necessary for correct operation of the electric ignition system. If the wall receptacle does not provide correct polarity, the ignitor will become grounded and click every once in

a while, even after the burner has ignited. A qualified electrician should check the wall receptacle to see if it is wired with correct polarity.

wWARNING

Fire Hazard

Do not let the burner flame extend beyond the edge of the pan.

Turn off all controls when not cooking.

Failure to follow these instructions can result in death or fire.

Burner heat settings

Use correct burner heat settings (see chart later in this section). If the heat setting is too high, it can:

•Char bacon and cause curling.

•Make eggs tough and crisp at the edges.

•Toughen liver, fish, and seafood.

•Scorch delicate sauces and custards.

•Cause a boilover.

Until you get used to the settings, use the following as a guide.

SETTING	RECOMMENDED USE
HI	• To start food cooking.
	• To bring liquid to a boil.

Between • To hold a rapid boil. MED and • To quickly brown or

HI	sear meat.
MED	• To maintain a slow boil.
	• To fry poultry or meat.
	• To make pudding, sauce,
	or gravy.
Between	• To stew or steam food.
MED and
LO
LO	• To simmer food.
	• To keep food warm.
	• To melt chocolate or butter.

10