HANNspree ST08-10A1 user manual Switching Source Signals, Adjusting the Volume

Switching Source Signals

Press SOURCE to select different source signals.

CH, AV1, and AV2 appear on the top right corner of the screen in that order.

Note

The TV supports S-Video input in addi- tion to normal video and audio sig- nals. The TV detects the signal type automatically and gives priority to S- video when two signals are detected at the same time.

Adjusting the Volume

1Press the volume up button to increase the volume.

2Press the volume down button to decrease the volume.

3Press MUTE. The word “MUTE” appears on the top right corner of the screen and sound is turned off.

4Press MUTE again to restore the original volume.

CH 33

Source

MUTE

Volume up Volume down

29