Solaris oval escutcheon only: Install the white spacers on the carrier plate (a). Install two Duotec strips on the spacers (b).
Install the remaining two strips on the back of the escutcheon.
English |
a |
b |
All other models: Install two Duotec strips directly on the carrier plate. Install the remaining two strips on the back of the escutcheon.
Install the carrier plate gasket and carrier plate with the carrier plate screws.
Press the escutcheon very firmly over the carrier plate, so that the strips of Duotec interlock, produc- ing a very firm hold.
Install the handle. Tighten the handle screw with a 3 mm Allen wrench. The handle screw must engage the slot milled into the brass on the cartridge.
Set the high temperature limit stop (optional)
Justify the handle
