Showerhead Installation

Remove the old showerhead:

While holding the shower arm, remove the exist- ing showerhead by turning counter-clockwise with a wrench.

Clean the threads on the shower arm with a wire brush.

Install the new showerhead:

Slide the boot onto the shower arm. Push it out of the way.

Screw the showerhead onto the arm by hand. Finish tightening with a wrench, if desired.

Turn on the water and check for leaks.

Pull the boot down over the joint.

Note: Retroaktiv 06397XX0 does not include a boot.

Handshower Installation

Place the screen washer in the end of the handshower hose (not included). Screw the hose to the hand- shower.