6.Press the handle 4 toward the finger hole and lift the air baffle out of the server.
Attention: For proper cooling and airflow, replace the air baffle before you turn on the server. Operating the server with an air baffle removed might damage server components.
Installing the DIMM air baffle
The following illustration shows how to install the DIMM air baffle.
1 | DIMM air baffle |
2 | Riser card assembly |
3 | Finger hole |
4 | Release ring |
To install the DIMM air baffle, complete the following steps:
1.Read the safety information that begins on page v and “Installation guidelines” on page 29.
2.Make sure that the server and peripheral devices are turned off (see “Turning off the server” on page 12) and that all power cords and external cables are disconnected.
Attention: In a dc power environment, only trained service personnel other than Lenovo service technicians are authorized to connect or disconnect power to the dc power supply. See the documentation that comes with each dc power supply.
3.Remove the cover (see “Removing the cover” on page 31).
38ThinkServer RD120 Types 6444, 6445, 6446, and 6447: User Guide
