c.Rotate the microprocessor release lever 2 on the socket from its closed and locked position until it stops in the fully open position.
Attention:
v Do not touch the microprocessor contacts; handle the microprocessor by the edges only. Contaminants on the microprocessor contacts, such as oil from your skin, can cause connection failures between the contacts and the socket.
vHandle the microprocessor carefully. Dropping the microprocessor during installation or removal can damage the contacts.
vDo not use excessive force when you press the microprocessor into the socket.
vMake sure that the microprocessor is oriented, aligned, and positioned in the socket before you try to close the lever.
1 | Microprocessor |
2 | Alignment marks |
3 | Notches |
d.Align the microprocessor with the socket (note the alignment mark and the position of the notches); then, carefully place the microprocessor in the socket. Close the microprocessor bracket frame.
Note: The microprocessor fits only one way on the socket.
e.Carefully close the microprocessor release lever to secure the microprocessor in the socket.
10.Install a heat sink on the microprocessor.
58ThinkServer RD120 Types 6444, 6445, 6446, and 6447: User Guide
