vInformation LED: When this LED is lit, it indicates that a noncritical event has occurred. An LED on the diagnostics panel is also lit to help isolate the error.
v
vRelease latch: Slide this latch to the left to access the diagnostics panel, which is behind the operator information panel.
USB connectors: Connect a USB device, such as USB mouse, keyboard, or other USB device, to either of these connectors.
Video connector: Connect a monitor to this connector. The video connectors on the front and rear of the server can be used simultaneously.
Hard disk drive activity LED: Each
Hard disk drive status LED: Each
CD/DVD drive activity LED: When this LED is lit, it indicates that the
Rack release latches: Press these latches to release the server from the rack.
Rear view
The following illustration shows the connectors and LEDs on the rear of the server.
Attention: In a dc power environment, see the documentation that comes with the dc power supply for information about the
1 | Power cord connector | 11 | Ethernet 2 connector |
2 | AC power LED | 12 | USB 2 connector |
3 | DC power LED | 13 | USB 1 connector |
4 | 14 | Video connector | |
5 | 15 | System error LED | |
| connector |
|
|
6 | Ethernet activity LEDs | 16 | System locator LED |
7 | Ethernet link LEDs | 17 | Power on LED |
8 | Ethernet connector 1 | 18 | Serial connector |
9 | USB 4 connector | 19 | SAS connector |
10ThinkServer RD120 Types 6444, 6445, 6446, and 6447: User Guide