Lenovo RD120 manual Connect any required cables to the adapter

8.If you removed the PCI riser-card assembly to install the adapter, align the riser-card assembly with the release-tab posts, rear guides, and connector; then, press the PCI riser-card assembly firmly into the connector (see “Installing the riser-card assembly” on page 34).

1 Access holes

2 Guide

3 Release tabs

4 Guide

9.Connect any required cables to the adapter.

Attention:

vWhen you route cables, do not block any connectors or the ventilated space around any of the fans.

vMake sure that cables are not routed on top of components under the PCI riser-card assembly.

vMake sure that cables are not pinched by the server components.

10.Perform any configuration tasks that are required for the adapter.

42ThinkServer RD120 Types 6444, 6445, 6446, and 6447: User Guide