Lenovo RD120 manual CPU Options

–CPU Options

Select this choice to specify the system cache type, and to enable or disable hyper-threading, the pre-fetch queue, and Virtualization Technology for all microprocessors in the server. Virtualization Technology enables the microprocessor to appear to be a dedicated processor to each running application in the system.

–PCI Bus Control

Select this choice to view the system resources that are used by installed PCI (PCI Express or PCI-X) devices. You can change the master latency timer value, view and configure PCI interrupt routing, and enable or disable the loading and execution of ROM code per PCI slot (see message 1801 in the Hardware Maintenance Manual on the ThinkServer Documentation DVD).

–PCI Slot/Device Information

This choice is available only if an optional Remote Supervisor Adapter II SlimLine is installed.

Select this choice to view the PCI device information, including PCI bus number, for each PCI slot. Highlight a slot; then, press Enter to view the details of the PCI devices that are connected to the slot. Follow the instructions on the screen to page forward or backward through the devices that are connected to the slot.

–RSA II Settings

This choice is available only if an optional Remote Supervisor Adapter II SlimLine is installed

Select this choice to configure the settings for the Remote Supervisor Adapter II SlimLine.

-MAC Address

This is a nonselectable item that displays the MAC address of the Remote Supervisor Adapter II SlimLine.

-DHCP IP Address

This is a nonselectable item that displays the current IP address of the Remote Supervisor Adapter II SlimLine.

-DHCP Control

Specify whether to use the static IP address or use DHCP to dynamically assign the IP address for the Remote Supervisor Adapter II SlimLine. If DHCP times out while it is assigning an IP address, the system defaults to the static IP address.

-Static IP Settings

Define the static IP address, subnet mask, and gateway address for the Remote Supervisor Adapter II SlimLine.

-OS USB selection

Select the operating system to use to provide USB support for remote access to the Remote Supervisor Adapter II SlimLine. The remote keyboard and mouse access the Remote Supervisor Adapter II SlimLine through a USB port. Linux OS is the default setting.

–Baseboard Management Controller (BMC) setting Select this choice to change settings for the BMC.

-BMC Firmware Version

This is a nonselectable menu item that displays the BMC firmware version.

82ThinkServer RD120 Types 6444, 6445, 6446, and 6447: User Guide