Assembling the EFX

17

2.Thread the cable through the left upright support. Tape it to the top of the upright support to secure it temporarily.

Important: Do not stretch, crimp, or damage the cable. Cables damaged by improper installation will not be covered by the Precor Limited Warranty.

Figure 3: Route the cable

3.Attach the left upright support to the base frame using four buttonhead screws, four split washers, and four ⁵₁₆-inch washers. Partially tighten the fasteners.

Figure 4: Attach the upright support to the base frame

4.Repeat steps 2 through 4 to attach the right upright support.

Page 19
Image 19
Precor EFX 883, EFX 833 warranty Repeat steps 2 through 4 to attach the right upright support