Precor EFX 833, EFX 883 To mount the center column support on the frame, Lift cover replacement

20 Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 883 / 833

12. Replace the lift cover that was removed in the first step.

Figure 7: Lift cover replacement

To mount the center column support on the frame:

Note: Check that the base fasteners are loose before installing the fasteners for the central column support.

1.Have your assistant support the center column support while you align the inside mounting brackets with the upright supports.

2.Fasten the center column support to each upright support by threading a buttonhead screw, a ⁵₁₆-inch washer, and a split washer through opposite mounting holes.

Figure 8: Rear view of console attachment

Important: When wrench-tightening the screws, make sure the head of the fastener is parallel to the product surface. If it is not, stop tightening to avoid cross-threading. To avoid further damage, stop assembly work and contact Customer Support.