Assembling the EFX | 19 |
9.Attach the cable to the appropriate connector inside the base of the EFX, as shown in the following illustration and table.
Figure 6: Cable connection points inside EFX base
Connect …
The console power cable (red and black, individual leads)
The television cable (black and round)
The Ethernet cable (black and flat)
To …
The power connector on the jack panel
The coaxial connector on the jack panel
The
10.Repeat steps 7 through 9 for the remaining cables you want to install.
11.Replace the central plastic base cover, then attach the four buttonhead screws you removed along with the cover. Tighten the screws completely.
