Lenovo RD120 manual vDate and Time, vSystem Security, Administrator Password, Power-onPassword

vDate and Time

Select this choice to set the date and time in the server, in 24-hour format (hour:minute:second).

This choice is on the full Configuration/Setup Utility menu only.

vSystem Security

Select this choice to set passwords. See “Passwords” on page 84 for more information.

This choice is on the full Configuration/Setup Utility menu only.

–Administrator Password

Select this choice to set or change an administrator password. An administrator password is intended to be used by a system administrator; it limits access to the full Configuration/Setup Utility menu. If an administrator password is set, the full Configuration/Setup Utility menu is available only if you type the administrator password at the password prompt. For more information, see “Administrator password” on page 85.

–Power-on Password

Select this choice to set or change a power-on password. See “Power-on password” on page 84 for more information.

vStart Options

Select this choice to view or change the start options, including the startup sequence, keyboard NumLock state, PXE boot option, and PCI device boot priority. Changes in the start options take effect when you start the server.

The startup sequence specifies the order in which the server checks devices to find a boot record. The server starts from the first boot record that it finds. For example, you can define a startup sequence that checks for a disc in the CD-RW/DVD drive, then checks the hard disk drive, and then checks a network adapter.

This choice is on the full Configuration/Setup Utility menu only.

vAdvanced Setup

Select this choice to change settings for advanced hardware features.

Important: The server might malfunction if these options are incorrectly configured. Follow the instructions on the screen carefully.

This choice is on the full Configuration/Setup Utility menu only.

–System Partition VIsibility

Select this choice to make the System Partition hidden or visible.

–Memory Settings

Select this choice to enable or disable pairs of memory connectors, configure the memory mode (flat, memory-mirroring, or online-spare), and view the memory speed.

Chapter 3. Configuring the server 81