Hans Grohe AlFie Aquasaur manual The Fun Handshower

The Fun Handshower

Enclosed you will find complete instructions for installing Alfie the Aquasaur, a brightly colored handshower that makes showering fun. Designed for the young at heart, Alfie features two spraymodes and unique self-cleaning whiskers.

Alfie the Aquasaur is just one of a full range of Hansgrohe products for bath and kitchen. Each product has been carefully designed to be safe, reliable, and easy to use.

If you would like to receive further information on Hansgrohe, please call us at 800 334 0455.

Replacing existing showerhead with Alfie

•Unscrew existing showerhead from shower arm.

•Clean threads on shower arm with steel wool and wrap the threads with TeflonTM tape.

•Place a hose washer in the shorter of the two hose end connectors on the Techniflex hose. Screw this end of the hose to the shower arm. If wrench tightening is necessary, use a cloth to protect the finish.

•Place a second hose washer in the longer hose end connector. Attach this end to Alfie and hand tighten.

•Support Alfie with a stationary handshower support (28321000), or an angle-adjustable Porter’E handshower support (27504000).

•Note: see instructions provided with individual products for additional installation guidelines.

•Note: Hansgrohe recommends the use of external vacuum breaker (06510000) between the shower arm and Techniflex hose.

Adding Alfie to an existing showerhead with Inversa diverter

•Remove existing showerhead from the shower arm. If it is necessary to use a wrench, protect the showerhead and shower arm connector with a cloth.

•Clean the shower arm threads with steel wool and wrap with TeflonTM tape.

•Attach Inversa Diverter (28719000) to shower arm. Wrench tighten, using a cloth to protect the finish. Wrap both outlets of the Inversa with TeflonTM tape.

•Reattach the showerhead to the front outlet of the Inversa diverter and wrench tighten.

•Place a hose washer in the shorter hose end connector. Screw the shorter hose end connection to the side outlet port of the Inversa.

•Place a hose washer in the longer hose end connector. Attach this end to Alfie and hand tighten.

•Use handshower support (28321000) to support Alfie.

The following

installation options re-

quire in-wall

plumbing

Installation by a

professional plumber is

required.

	03/2008
Please note: in Massachusetts, the	90743105

maximum output water temperature can be no higher than 112°F.