Hansol Multitech B19BL Safety information, Connection to your computer, Power management system

Introduction

Safety information

Provided with this monitor is a detachable power supply cord with IEC320 style terminations. It may be suitable for connection to any UL listed personal computer with similar configuration. Before making the connection ensure that the voltage rating of the computer convenience outlet is the same as the monitor and that the ampere rating of the computer convenience outlet is equal to or exceeds the monitor current rating.

For 120Volt applications use only UL listed detachable power cord with NEMA configuration 5-15P type(parallel blades) plug cap.

For 240Volt applications use only UL listed detachable power cord with NEMA configuration 6-15P type(tandem blades) plug cap.

Use only a power source and connection appropriate for the monitor as indicated on the marking label.

Slots and openings in the cabinet are provided for ventilation;

these openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings.

Never insert anything metallic into the monitor openings.

Doing so may create a danger of electric shock.

To avoid electric shock, never touch the inside of the monitor.

Only a qualified technician should open the monitor s case.

Unplug the monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp, lint-free cloth for cleaning.

Install the monitor near an outlet that you can reach easily. Disconnect the product by grasping the plug firmly and pulling in from the outlet.

Never disconnect it by pulling the cord.

6 User’s Manual

Introduction

Power management system						ENGLISH
This monitor meets VESA(Video Electronics Standards Association) DPMS(Display Power
Management Signalling)standards. In order for the monitor s power saving feature to function,
the video board or computer must also meet VESA® DPMSTM standards.
	Power management table
	State	Normal	Power saving function mode
	Sync	Operation	Standby	Suspend Mode	Power-Off Mode
	Horizontal	Active	Inactive	Active	Inactive
	Vertical	Active	Active	Inactive	Inactive
	Video	Active	Blanked	Blanked	Blanked
	LED Color	Green	Green/AMBER	AMBER	AMBER Blinking
	Power	120W	Less than	Less than	Less than
	Consumption		80% of MAX	15W	8W

Note : The monitor automatically goes through the DPMS steps when it is idle.

To release the monitor from the DPMS condition, press any key on the keyboard.

Connection to your computer

CAUTION

Ensure that both the PC and the display monitor are switched off.

To attach the monitor to your system, as shown in the following illustrations.

1. Connect the signal cable	to the 15pin
graphics connector of the system and tighten
the fastening screws.
2. Insert the AC power cord	into monitor and

then into an AC power outlet.

3. To turn on the monitor, push the power switch.

Note : To attach the monitor to the Macintosh system, please contact an authorized dealer.(Need to use a special adaptor)

User’s Manual 7