Use
Step 1: Set the compressor’s pressure regulator to a maximum of 90 PSI. 90 PSI is satisfactory without harming this tool.
Step 2: You will need to purchase a union fitting (sold separately) before you can connect the Impact Wrench to your air compressor. You may also wish to purchase an Air Coupler as this allows
Step 3: Determine the socket size necessary for the job you need to do. Attach the appropriate 3/4" drive socket to the Impact Wrench as shown in Figure 2.
3/4“ Drive Socket
Air Coupler
Figure 2 — Attaching the Air Coupler and Socket
Step 4: Connect the Impact Wrench to the air compressor’s hose. If leaking is detected, disconnect the air hose and repair before use.
SKU 32871 For technical questions, please call | Page 6 |
