Page 7SKU 32871
For technical questions, please call 1-800-444-3353.
Step 5: Select the power setting for Loosening by adjusting the AIR REGULATOR (#46) located
on the bottom of the Impact Wrench as shown
in Figure 3. When the Air Regulator is
completely screwed in it is at it’s lowest setting.
Air pressure increases as you loosen
the Air Regulator.

Air Regulator

(#46)

Figure 3 — Adjusting the Reverse Power Setting
Step 6: Select the direction of the Wrench (forward or reverse) by pushing the REVERSE
VALVE (#48) located on the handle of the Impact Wrench as shown in Figure 4.

Reverse Valve

(#48)

R
R
Valve in Forward Position.
Push in to Reverse
Figure 4 — Selecting Reverse Direction
CAUTION
Use the Setting Appropriate for the
Job. Do Not Set the Power Setting
Higher Than Needed. Damage to
Parts Could Result.