| SPECIFICATIONS TABLE | ||
Item |
| Description | |
|
|
| |
Electrical Requirements |
| 115 VAC, 60 Hz, 5.3 Amps, 9,000 RPM, | |
| 16 Gauge, 6' UL Listed Cord with 2 Prong Plug | ||
|
| ||
|
|
| |
6" Maximum Diameter, | |||
9,000 Minimum RPM | |||
|
| ||
|
|
| |
Spindle Diameter |
| 5/8" (outer flange adapts to fit 7/8" Arbor) | |
|
|
| |
Base Dimensions |
| 14" x 16" x 11" | |
|
|
| |
Vise Jaw Opening |
| ||
|
|
| |
Vise Swivel Cap (with Scale) |
| ||
|
|
| |
Weight |
| 9.3 Pounds | |
|
|
| |
FOR USE WITH CUTOFF GRINDING WHEEL (SKU #42400)- NOT INCLUDED.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance, and cleaning procedures. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY WARNINGS AND PRECAUTIONS
1.KEEP WORK AREA CLEAN AND DRY. Cluttered, damp or wet work areas invite injuries.
2.KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle this product.
3.STORE IDLE EQUIPMENT. When not in use, tools and equipment should be stored in a dry location to inhibit rust. Always lock up tools and equipment and keep out of reach of children.
4.DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not attempt to use this product.
5.USE EYE, HEARING, AND BREATHING PROTECTION. Wear ANSI approved safety impact eyeglasses, hearing protectors, dust masks or respirator when using this product. ANSI approved safety impact eyeglasses, hearing protectors, dust masks and respirators are available from Harbor Freight Tools.
REV 12/04; 01/05
SKU 41453 | For technical questions, please call | PAGE 2 |
