Harbor Freight Tools 41453 manual SKU For technical questions, please call

7.NOTE: Performance of this tool may vary depending on variations in local line voltage. Extension cord usage may also affect tool performance.

8.MAINTAIN A SAFE WORK ENVIRONMENT. Do not use the Cut-Off Saw in or near damp or wet areas. Do not expose this tool to rain. Keep the work area well lit. Make sure there is adequate surrounding workspace. Use this tool in a well ventilated area. Do not operate this tool in the presence of flammable liquids, gases, or dust.

9.DO NOT FORCE THE EQUIPMENT. This Cut-Off Saw will do the work better and safer at the speed and capacity for which it was designed.

10.KEEP ALL GUARDS IN PLACE AND IN WORKING ORDER.

11.REMOVE ALL ADJUSTING WRENCHES FROM THE CUTOFF SAW BEFORE TURNING IT ON.

12.AVOID UNINTENTIONAL STARTING. Make sure you are prepared to begin work before turning the Power Switch “ON.”

13.ALLOW THE CUTOFF GRINDING WHEEL TO SPIN UP TO FULL SPEED BEFORE FEEDING MATERIAL INTO IT. When turning it off, allow the Cut-Off Grinding Wheel to spin down and stop on its own. Do not press against the Cut-Off Grinding Wheel to stop it.

14.ALWAYS KEEP HANDS AND FINGERS AWAY FROM THE CUTOFF GRIND- ING WHEEL. Never pass hands directly in front of, to the rear, or below the Cut-Off Grinding Wheel when cutting a workpiece.

15.DO NOT FORCE THE CUTOFF GRINDING WHEEL INTO THE WORKPIECE WHEN CUTTING. Apply moderate pressure, allowing the Cut-Off Grinding Wheel to cut without being forced.

16.NEVER ATTEMPT TO REMOVE MATERIAL STUCK IN THE MOVING PARTS OF THE CUTOFF SAW WHILE IT IS PLUGGED IN AND RUNNING.

17.TURN OFF THE CUTOFF SAW IF THE WORKPIECE IS TO BE BACKED OUT OF AN UNCOMPLETED CUT.

18.MAKE SURE THE WORKPIECE IS FREE FROM ANY FOREIGN OBJECTS WHICH COULD DAMAGE THE CUTOFF GRINDING WHEEL.

19.MAKE SURE THE WORKPIECE IS SUPPORTED AT ALL TIMES DURING OPERATION. Use a Roller Stand (not provided) with a larger workpiece if neces- sary.

SKU 41453 For technical questions, please call 1-800-444-3353. PAGE 5