Harbor Freight Tools 41831 Specifications, Included Accessories, Features, Save this Manual

SPECIFICATIONS

Motor:	115V/60Hz. 2.2 HP	Cutting Capacity:
Cuts per Minute:	16,000	Length of unbutted stock:		8”minimum
No Load RPM’s:	8000	Width of stock:		12-1/2” max.
Cutting Knives:	2, Bi-Metal, M-2 edge	Thickness of stock:		1/4” - 6”
Feed Rate:	23 feet per minute	Depth of Cut:		1/8” max.
Table Dimension:	12-9/16”L x 11-1/2”W	Power Cord:	3-pole, UL approved
Table w/ Extension:	23-1/8”L	Overall Dimensions:	22” x 19-1/2” x 19”
Sound Level:	98 DB	Net Weight:	100 Lbs.

INCLUDED ACCESSORIES

Open end box wrench (8mm x 10mm)	Carbon Brush set
3mm, 5mm, and 6mm hex wrenches	Blade / Knife Gauge

FEATURES

1.Adjustable extensions to support long workpieces.

2.Anti-kickback safety devices to prevent workpiece from being ejected toward the operator.

3.Two hardened bi-metallic blades are fully adjustable and replaceable for powerful cutting performance.

4.Compact and lightweight machine which can plane workpieces up to 12-1/2” wide and 6” thick.

5.Positive adjusting table with crank handle and easy to read thickness gauge.

6.ON / OFF switch has removable safety lock device to prevent unauthorized use of the machine.

7.Integral circuit breaker protects the motor from burn out.

SAVE THIS MANUAL

You will need the manual for the safety warnings and cautions, assembly instructions, operating procedures, maintenance procedures, trouble shooting, parts list, and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep both this manual and your invoice in a safe, dry place for future reference.

READ ALL INSTRUCTIONS BEFORE USING THIS TOOL!

NOTICE

The Warnings, Cautions, and Instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Page 2 SKU # 41831