Maintenance And
Servicing
Procedures not specifically explained in this manual must be performed only by a qualified technician.
To prevent serious injury
from accidental operation:
Turn the Power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
To prevent serious injury from tool failure:
Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
Cleaning, Maintenance, and
Lubrication
every work session remove sawdust from the motor vents. Prevent wood, dust and debris from accumulating in the working area. Keep the Saw Blade (18) clean and sharp. A sharp blade will minimize stalling and kick- back.
3.
WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician.
1.BEFORE EACH USE, inspect the general condition of the tool. Check for loose hardware, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wir- ing, and any other condition that may affect its safe operation.
2.After Use: Remove all sawdust that has accumulated around the Blade Guard (21), the Motor (1) and the Motor Housing (36). Regularly clean the work surface with a vacuum cleaner or a dry brush. At the end of
SKU 42307 | For technical questions, please call | Page 9 |
