Specifications

 

 

 

 

Electrical Requirements

120 V~, 60 Hz, 1 A (loaded)

 

Speed

12,000 OPM (Orbits Per Minute)

 

Dust Chute

1-1/4” OD

E194601

Dimensions

4” W x 4-3/4” L x 5-3/4” H

 

 

Dimensions: 3-1/2” W x 7-3/8” L

 

Finishing Sander Pads

Sold separately as Item 91063 - a 15 pack

 

 

with 5 each of 80, 150, & 240 grit

 

Weight

2.5 lb.

 

SAVE THIS MANUAL

You will need this manual for the safety warnings and precautions, assembly, oper- ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.

GENERAL SAFETY RULES

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in

electric shock, fire, and/or serious injury.

SAVE THESE INSTRUCTIONS

WORK AREA

1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. Make sure there is adequate surrounding workspace.

2.Do not operate power tools in explosive atmospheres, such as in the pres- ence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

3.Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed.

ELECTRICAL SAFETY

1.Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with

SKU 42864

For technical questions, please call 1-800-444-3353.

Page

Page 2
Image 2
Harbor Freight Tools 42864 manual General Safety Rules, Specifications, Save this Manual, Work Area, Electrical Safety