Specifications
ITEM | DESCRIPTION |
Motor | 120 VAC, 60 Hz, single phase, 1/3 HP, 1700 |
| RPM, 3 amps |
Spindle Speeds | 620, 110, 1720, 2340, 3100 RPM |
Spindle Stroke | 3 inches |
Spindle Taper | MT2 |
Spindle to Base Distance | |
Spindle to Table Distance | |
Column | 3.12 (diameter) x |
| Head to Base |
Base Dimensions | |
| x |
Overall Dimensions | |
Chuck | Taper: |
Table Slot | 5/8 (W) x 3 (L) inches |
Table Rotation | 360°; Tilt: 45° (left and right) |
Head Tilts | 0° |
Radial Travel | 12 inches |
Table Size | |
Weight | 135 lbs. |
# 86PJ
E105017
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.Keep work area clean. Cluttered areas invite injuries.
2.Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically powered tools in the presence of flammable gases or liquids.
3.Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords.
4.Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.
SKU 44846 | Page 2 | Rev 10b |
