replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools.

19.Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool.

20.Use proper size and type extension cord. If an extension cord is required, it must be of the proper size and type to supply the correct current to the tool without heating up. Otherwise, the extension cord could melt and catch fire, or cause electrical damage to the tool. This tool requires use of an extension cord of 0 to 12 amps capability (up to 50 feet), with wire size rated at 16 AWG. Longer extension cords require larger size wire (smaller AWG number). If you are using the tool outdoors, use an extension cord rated for outdoor use. (Signified by “WA” on the jacket).

21.Secure Workpiece. Use clamps or a vise to hold workpiece, if possible. Never hold workpiece with your hands.

22.Never leave Drill Press running unattended. Turn the power OFF.

23.Maintenance. For your safety, service and maintenance should be performed regularly by a qualified technician.

Note: Performance of this tool may vary depending on variations in local line voltage. Exten- sion cord usage may also affect tool performance.

Warning:The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be under- stood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Drill Press Safety Warnings and Precautions

1.Secure the Drill Press Base to the floor using 7/16 inch bolts (not supplied).

2.Locate the Drill Press in an area where you walk around it unhampered.

3.Avoid kickback and grabbing by clamping the workpiece to the table, or use a vise that is secured to the table. If the workpiece begins to spin, do not attempt to stop it with your hands. Turn the motor OFF, and wait until it stops spinning before attempting to remove it.

4.Avoid being caught and pulled into the spinning chuck. Do not wear gloves, long sleeve shirts, ties, or jewelry. Long hair must be bundled behind the head.

5.Never place hands and arms near the workpiece to avoid the possibility of the workpiece coming loose and striking you.

6.Before drilling, turn on the motor and check for bit wobble or machine vibration. If this is found, correct the problem before drilling.

7.Set the proper spindle speed for the specific drilling operation.

SKU 44846

Page 4

Page 3 Page 5
Page 4
Image 4
Harbor Freight Tools 44846 operating instructions Drill Press Safety Warnings and Precautions
Page 3 Page 5

44846 specifications

Harbor Freight Tools 44846, also known as the Central Pneumatic 21-Gallon Horizontal Air Compressor, has gained significant attention among both DIY enthusiasts and professionals alike. This reliable and efficient air compressor boasts a variety of features that make it a staple in workshops and job sites.

One of the most notable features of the 44846 is its powerful 1.5 horsepower motor, capable of delivering a maximum pressure of 125 PSI. This ensures a quick recovery time, allowing users to work with pneumatic tools seamlessly. The 21-gallon horizontal tank provides ample storage, enabling longer operating times without frequent refills. Ideal for a range of applications, from powering air tools to inflating tires, this compressor stands out for its versatility.

Another essential characteristic of the Harbor Freight 44846 is its oil-lubricated pump, which promotes efficient performance and longevity. The pump aids in maintaining lower operating temperatures, reducing wear and tear on internal components. This feature is particularly beneficial for users engaged in extended projects or heavy-duty tasks.

Safety and convenience are also paramount in the design of the 44846. Equipped with a pressure regulator, users can adjust the output pressure according to their specific needs, ensuring optimal performance during use. The built-in quick connect coupler provides easy access to tools, while the large, durable wheels make transportation to various work locations hassle-free.

Additionally, the compressor features a low noise level, producing a moderate sound output during operation. This makes it suitable for environments where noise reduction is essential, allowing users to work in residential areas without disturbing neighbors.

Maintenance is simplified with the Harbor Freight 44846, as it includes a removable air filter for easy cleaning and replacement. This design consideration helps maintain efficiency over time and ensures that the compressor operates at peak performance.

Overall, the Harbor Freight Tools 44846 Central Pneumatic 21-Gallon Horizontal Air Compressor is an exceptional choice for those needing a reliable, versatile, and durable compressor. Its combination of power, efficiency, and user-friendly features makes it an excellent addition to any toolkit, whether for home use or professional applications. With proper care and maintenance, this compressor promises to serve users well for many projects to come.
Top Page Image Contents