8.Use eye and ear protection. Always wear ANSI approved impact safety goggles.
9.Do not overreach. Keep proper footing and balance at all times. Do not reach over or across electrical cables or frames.
10.Maintain tools with care. Inspect tool cords periodically and, if damaged, have them repaired by an authorized technician.
11.Use the right tool for the job. Do not attempt to force a small Coolant Pump or attachment to do the work of a larger industrial Coolant Pump. There are certain applications for which this product was designed. Do not modify this Coolant Pump and do not use this tool for a purpose for which it was not intended.
12.Stay alert. Watch what you are doing, use common sense. Do not operate any Coolant Pump when you are tired.
13.Check for damaged parts. Before using any Coolant Pump, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if lever does not turn On and Off properly.
14.Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this Coolant Pump. Approved accessories are available from Harbor Freight Tools.
15.Do not operate Coolant Pump if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the Coolant Pump.
16.Use proper size and type extension cord. If an extension cord is required, it must be of the proper size and type to supply the correct current to the tool without heating up. Otherwise, the extension cord could melt and catch fire, or cause electrical damage to the tool. This tool requires use of an extension cord of 0 to 10 amps capability (up to 50 feet), with wire size rated at 18 AWG. Longer extension cords require larger size wire. If you are using the tool outdoors, use an extension cord rated for outdoor use. (signified by “WA” on the jacket).
17.Maintenance. For your safety, maintenance should be performed regularly by a qualified technician.
SKU 45333 | Page 3 |
