Harbor Freight Tools 46365 operating instructions Special Warnings for this Tool

Models: 46365

1 9
Download 9 pages 28.02 Kb
Page 4
Image 4

for the Air Compressor, it must be of the proper size and type to supply the correct current to the tool without heating up. Otherwise, the extension cord could melt and catch fire, or cause electrical damage to the tool. If you are using the tool outdoors, use an extension cord rated for outdoor use. (signified by “WA” on the jacket).

21.Maintenance. For your safety, service and maintenance should be performed regularly by a qualified technician.

Note: Performance of this tool (if powered by line voltage) may vary depending on variations in local line voltage. Extension cord usage may also affect tool perfor- mance.

Special Warnings for this Tool

It is especially important that you read and comply with the following safety precautions.

1.Never, under any circumstances, press the tip of this tool against another person or yourself.

2.Excess air may remain in the tool even after the tool is disconnected from the air supply. For this reason, be especially careful never to carry this tool with your finger on the trigger, and do not press the tip against any surface even when the tool is not connected to an air supply.

3.While using this tool, be sure to keep fingers, hands and all other body parts away from the tip of the tool.

4.Never use combustible gas as a power source.

5.Never use gasoline or other flammable liquids to clean the Stapler.

6.Do not exceed the maximum operating pressure of 95 PSI as stated in the Specifications Chart and warning label.

7.Ear protection is required for the operator and others in the work area.

8.Never attempt to drive staples on top of other staples.

9.Never attempt to keep the Trigger depressed with tape or wire.

10.Never leave the tool unattended or connected to the air supply when not in use.

11.Do not throw the tool or use it as a hammer to knock material into place.

12.Avoid prolonged use of the Stapler, and do not use this tool if you have back, neck or other bodily injuries that might be aggravated by the jerking motion of the tool. Stop using this tool if you experience pain in your arms or hands.

SKU 46365

Page 4

Page 4
Image 4
Harbor Freight Tools 46365 operating instructions Special Warnings for this Tool