![](/images/new-backgrounds/1314863/3148633x1.webp)
SPECIFICATIONS TABLE
Item | Description |
Electrical | 120V / 60 Hz / 11 Load Amp |
Requirements | Double Insulated Motor |
| 1,000 - 3,000 RPM Variable Speed |
| 16 Gauge Power Cord |
Spindle Thread | |
Handle Mounting | Threaded, 3 Positions |
Wool Cover Size | 8” |
Tool Length | 17” |
Tool Weight | 8.40 Lbs. With Wool Cover |
96GA
E210256
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance, and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY WARNINGS AND PRECAUTIONS
1.KEEP WORK AREA CLEAN AND DRY. Cluttered, damp or wet work areas invite injuries.
2.KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle this product.
3.STORE IDLE EQUIPMENT. When not in use, tools and equipment should be stored in a dry location to inhibit rust. Always lock up tools and equipment and keep out of reach of children.
4.DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not attempt to use this product.
5.USE EYE, BREATHING, AND HEARING PROTECTION. Wear ANSI approved safety impact eye glasses, ANSI approved breathing protection, and ANSI approved hearing protection when using this product. ANSI approved safety impact eye glasses, dust masks, and hearing protectors are available from Harbor Freight Tools.
SKU 46507 | PAGE 2 | Rev 12/01 |