Harbor Freight Tools 46507 manual To Attach The Rubber Backing Plate And Sandpaper

To Attach The Rubber Backing Plate And Sandpaper:

1.Caution: Prior to installing the Rubber Backing Plate (part #46), make sure the Polisher/Sander is disconnected from its electrical power source.

2.Rest the tool on a flat surface. Depress the Brake Pin (#18) to keep the Spindle (#3) from turning.

3.Screw the Rubber Backing Plate (46) onto the threaded end of the Spindle (#3) until it is snug. (See diagram below)

4.Ahere Sandpaper Disc (not included) evenly across the Rubber Backing Plate. The Rubber Backing Plate has a self-sticking backing, so be sure only to use Sandpaper Discs with a self-sticking material. Press Sandpaper Disc firmly onto pad. When finished, release pressure on the Brake Pin (#18).

5.When finished sanding, peel the Sandpaper Disc away from the Plate. RUBBER BACKING PLATE (#46)

SANDPAPER DISC

SPINDLE (#3)

BRAKE PIN (#18)

SKU 46507 PAGE 7