4.Position the Tool Chest (8) between the two Side Braces (3), resting the Tool Chest on the Support Braces (7). From the underside of the Tool Chest (8) match up the holes on the Tool Chest and those in the Support Braces (7). Put Washer (14) on Bolt (15) and thread bolt into the bottom of the Tool Chest and Support Braces. See Figures A & B.
Tool
Chest (8)
Support
Brace (7) 
Side Brace 
(3)
Figure B | Figure C (View from Underneath) |
5.Attach the Upper Tray (2) by matching up the holes and securing with Bolts (1) threaded through the Side Braces (3). Secure with Washers (11), Spring Washers (12), and Nuts (13) on the inside of the Tray. Tighten hardware.
See Figures C & D .
Upper
Tray (2)
Caster
with Lock (4)
Sheath (6)
Bolt (1)
Washer (11)
Spring Washer (12)
Nut (13)
Figure D | Figure E |
6.Place Caster with Locks (4) and Sheath (6) into the longer side Brace (3). The longer Side Brace acts as a handle for the Service Cart with Tool Chest. Place Casters without Locks (5) and Sheath (6) into the shorter Side Brace (3).
See Figure F. (When not repositioning Service Cart, use the locks on the Casters (4). Unlock to move Cart). Caution: Casters without Locks (5) can still move to the right or left. See Figure D.
Caster (5)
Sheath (6)
Caster with
Lock (4)
Sheath (6)
Figure F
7.Objects need to be distributed evenly in the Tool Chest drawers to avoid tipping. Do not overload Trays (2) when moving Service Cart.
SKU 47418 | Page 4 |
